Fishing At The Bottom Or Float, How Deep Is It

1. Fishing at the bottom or fishing at the float

Bream is a type of fish that lives in fresh water. It can be seen everywhere and has a wide distribution. From the perspective of fishing methods, fishing bottom and floating are two different ways, and different choices are made when fishing for different species of fish. It needs to be determined based on the habit characteristics of the fish species, because the distribution of different fish species in the water is different. From the perspective of breams, they generally live in the middle and lower layers, and are middle and lower layers of fish species. In other words, they are mostly in deeper positions, so the bottom fishing method is more suitable.

Especially in winter, the temperature is relatively low. At this time, breams will generally go to a deeper position to fish, and sometimes even directly at the bottom. It is more appropriate to take the bottom fishing method. Of course, this does not mean that you must fish at the bottom in all cases. This method of fishing for floating may also be used, as long as the bream floats up at this time. When the air pressure is relatively low, the bream may float up, and you can use the method of fishing for floatation. In summer and autumn, sometimes you will encounter relatively stuffy weather, and you can use the method of fishing and floating.

2. How deep is the bream fish?

As mentioned above, bream is a species that lives in the middle and lower layers, so when fishing, the bottom is generally adopted. In addition, the specific depth situation also needs to be determined, and it is also a very important aspect. From the specific depth, the selected depth at this time is generally three or four meters. It is easier to fish bream in this depth range because it is easier to contact the water layer where the bream is located.

However, as mentioned above, under different circumstances, the situation of fishing at the bottom or floating is also different. If the bream is floating, it is also necessary to float. At this time, the depth needs to be slightly shallow. For example, you can choose a position of two or three meters or even a shallower position. It can be seen that the specific depth is not completely consistent, and it needs to be adjusted flexibly and adjust it according to the specific surrounding environment is the most appropriate.